Features and Benefits
SNMPv1/v2c/v3 is used for network management of various levels
RMON can be used for efficient and flexible network monitoring
Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
QoS supports real-time traffic classification and priority setting
LLDP can achieve automatic topology discovery, which is convenient for visual management
DHCP server and DHCP client could be used for allocating IP address of different strategies
File management is convenient for rapid configuration and online upgrade of the device
Log management records boot information, operation information and connection information
Bandwidth management and flow control can reasonably distribute network bandwidth, preventing unpredictable network status
Port statistics can be used for the port real time traffic statistics
Support Console/Telnet/WEB management
User password can conduct user hierarchical management to improve the device administrative security
Anti-attack control, ACL and 802.1X authentication could strength the flexibility and security of network
Relay alarm is convenient for troubleshooting of construction site
Storm suppression can restrain broadcast, unknown multicast and unknown unicast
SSHD configuration could encrypt transmitted data, prevent DNS and IP spoofing
TELNET configuration and HTTPS configuration could ensure the access security of data
VLAN can simplify the network planning
Port trunking and LACP can increase network bandwidth and the reliability of network connection to achieve optimal bandwidth utilization
IGMP-snooping and static multicast can be used for filtering multicast traffic to save the network bandwidth
Port isolation could achieve port isolation in the same VLAN and save Vlan resources
SW-Ring and STP/RSTP can achieve network redundancy, preventing network storm
Ping, Traceroute, Port Loopback could achieve network diagnosis and troubleshooting
PoE could power device over Ethernet, thus decreasing the cable connection of powered devices
Specification
| Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1X for 802.1X Authentication IEEE 802.1AB for LLDP IEEE 802.3ad for LACP IEEE 802.3af/at for PoE+ |
| Management | SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, DHCP Client, File Management, Log Management, Port Statistics |
| Security | Classification of User Permissions, anti-attack control, ACL, 802.1X Authentication, Port Alarm, Power Supply Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, HTTPS Configuration |
| Switch Function | 802.1Q Vlan, Static/Dynamic Port Aggregation, Bandwidth Management, Flow Control, Port Isolation |
| Unicast / Multicast | Static Multicast, GMRP, IGMP-Snooping |
| Redundancy Protocol | SW-Ring, STP/RSTP/MSTP |
| Troubleshooting | Ping, Traceroute, port loopback |
| Time Management | SNTP |
| PoE | The maximum power consumption of PoE port: 30W The power supply pin of PoE: V+, V+, V-, V- correspond to Pin 1, 2, 3, 6 |
| Interface | Copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning SFP slot: 1000Base-SFP Console port: CLI command line management port (RS-232), RJ45 Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, the current load capability is 1A/24VDC; 0.5A/120VAC |
| LED Indicator | Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator, POE Indicator |
| Switch Property | Transmission mode: store and forward MAC address: 8K Packet buffer size: 4Mbit Backplane bandwidth: 24G Switch time delay: <10μs |
| Power Requirement | 48VDC, 4-pin 7.62mm pitch terminal blocks dual power supply redundancy, reverse polarity protection |
| Power Consumption | No-load: ≤7.30W@48VDC Full-load: ≤103.49W@48VDC |
| Environmental Limit | Operating temperature range: -40~70℃ Storage temperature range: -40~85℃ Relative humidity: 5%～95% (no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal Installation: DIN-Rail mounting Weight: 1.07kg Dimension (W x H x D): 70mm×160mm×130mm |
| Industrial Standard | EN61000-4-2 (ESD) , Level 3 Air discharge: 8KV Contact discharge: 6KV EN61000-4-4 (EFT) , Level 3 Power supply 2kv Signal 1kv EN61000-4-5 (Surge) , Level 3 Power supply differential mode 1kv common mode 2kv Signal differential mode 1kv common mode 2kv Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Certification | CE, FCC, RoHS |
| Warranty | 5 years |
Ordering Information
| Available Models | Gigabit SFP Slot | Gigabit PoE Copper Port | Power Supply Range |
| IPS7112G-4GS-8GPOE | 4 | 8 | 48VDC dual power supply |
Product Tags:
|
|
240W 12-port Full Gigabit Managed Industrial PoE Switch 4GE SFP and 8GE copper ports Images
|
